CK3100, CK3300 and CK3500 Upgrade Procedure

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1         How can I update the Parrot kit's software?

 

 

  To update CK3100, CK3300, CK3500 kit, there are 3 ways:

 

 

1.1           By Serial connection.

      

     You will need a PC, a Parrot serial cable and the Parrot Flash Update wizard  

     software.

    

    

     In order to update your kit, please follow these steps:

    

-          Download and install the Parrot Flash Update wizard.

-          Connect your PC and your car kit with the Parrot serial cable.

-          Don’t switch on your Parrot car kit.

-          Start the Parrot Flash Update wizard.

 

 

 

 

-          Click on "Next".

 

 

-          Select the kind of car kit you want to update: CK3x00 series.

-          Click on "Next".

 

 

 

-          Click on "Download Latest Version".

-          Wait until the following window appears:

 

 

 

 

 

-          Click on "Download Now

-          Wait until the following window appears:

 

 

 

 

-          Click on "OK".

 

 

 

 

-          Click on "Next".

 

 

 

-          Select "Serial connection"

-          Click on "Next".

 

 

 

-          Select the port which is connected to your car kit.

-          Click on "Next".

 

 

 

-          When the Parrot Flash Update Wizard reaches the “XPRAM downloading”, plug the car kit’s power supply.

-          Wait until the Parrot Flash Update wizard completes all of the steps.

-          Click on "Next".

 

 

 

-          Click on "Finish".

-          Disconnect the kit from the PC.

-          Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or power of your car kit in the mean time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.2        Using Bluetooth.

1.2.1       First method.

 

      You will need a PC, a Bluetooth Dongle and the Parrot Flash Update wizard.

      In order to update your kit, please follow these steps:

 

-          Make sure your PC supports Bluetooth connectivity.

-          Download and install the Parrot Flash Update wizard.

-          Start the Parrot Flash Update wizard.

 

 

 

-          Click on "Next".

 

 

 

-          Select the kind of car kit you want to update: CK3x00 series.

-          Click on "Next".

 

 

 

-          Click on "Download Latest Version".

-          Wait until the following window appears:

 

 

 

 

 

-          Click on "Download Now".

-          Wait until the following window appears:

 

 

 

 

-          Click on "OK".

-          If you need to disconnect your PC from the Internet in order to get into your vehicle, you can find the binary files you have downloaded on your hard disk by following the path C:\Program Files\Parrot Flash Update Wizard\Internet Files path.

 

 

-          Switch on your kit.

-          On your car kit, activate the option "Software update" that you can find in the menu “Settings”, "Advanced Settings".

 

 

 

 

 

-          Find the Parrot car kit with the Bluetooth manager that is provided with the Bluetooth Dongle’s software.

-          Click on your Parrot car kit.

 

 

-          Click on "Next".

 

 

 

 

-          Enter the PASSKEY 1234.

-          Click on "Next".

 

 

 

-          The serial port by the Bluetooth dongle software is now active. Please write down the outgoing COM port number that the Bluetooth manager gives you on your computer. (In this example the active serial port is number 10.)

 

-          Start the Parrot Flash Update wizard.

 

 

 

 

-          Click on "Next".

 

 

 

-          Select the kind of car kit you want to update: CK3x00 series.

-          Click on "Next".

 

 

 

-          Click on "Browse" and reload the binary files you have downloaded on your hard disk by following the C:\Program Files\Parrot Flash Update Wizard\Internet Files path.

 

 

-          Click on "Next".

 

 

 

 

-          Select "Bluetooth virtual serial connection".

-          Click on"Next".

 

 

 

-          Select the port you have written down.

-          Click on "Next".

 

 

 

 

-          Wait until the Parrot Flash Update wizard completes all of the steps.

-          Click on "Next".

 

 

 

-          Click on "Finish".

-          Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or power your car kit in the mean time and do not remove the Dongle.

 

 

1.2.2       Second method.

 

You will need a PC, a Bluetooth Dongle and the Parrot Flash Update wizard. 

You can do it by this way only if you have Windows XP with the Service Pack 

 2. Please make sure that the Bluetooth Dongle’s drivers are not installed. If

needed uninstalled them.

 

In order to update your kit, please follow these steps:

 

-          Make sure your PC supports Bluetooth connectivity.

-          Download and install the Parrot Flash Update wizard.

-          Switch on your kit.

-          On you car kit, activate the option "Software update" that you can find in the  menu, "Advanced Settings".

 

 

 

 

-          Start the Parrot Flash Update wizard.

 

 

 

 

-          Click on "Next".

 

 

 

-          Select the kind of car kit you want to update: CK3x00 series.

-          Click on "Next"

 

 

 

-          Click on "Download Latest Version".

-          Wait until the following window appears:

 

 

 

 

-          Click on "Download Now".

-          Wait until the following window appears:

 

 

 

 

-          Click on "OK".

 

 

 

-          If you need to disconnect your PC from the Internet in order to get into your vehicle, you can find the binary files you have downloaded on your hard disk by following the path C:\Program Files\Parrot Flash Update Wizard\Internet Files.

 

-          Click on "Next".

 

 

 

-          Select "Bluetooth connection".

-          Click on "Next".

 

 

 

 

 

-          Click on "Search Devices".

-          Select your Parrot Car kit.

-          Click on "Next".

 

 

-          Enter the 1234 PASSKEY.

-          Click on "Next".

 

 

 

-          Wait until the Parrot Flash Update wizard completes all of the steps.

-          Click on "Next".

 

 

 

-          Click on "Finish".

-          Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or power off your car kit in the mean time and do not remove the Dongle.

 

 

 

1.2.3       Contact your dealer.

 

He is always available to help you.